5 pump, 1 pump - overview, Pump – Metrohm tiamo 2.4 Manual User Manual
Page 1241
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4
■■■■■■■■
1225
NOTE
Please make sure that none of the lift positions exceed the maximum
stroke path given in the tower properties of the device.
Parameters
Lift rate
Selection of the speed for moving the lift.
778, 789, 814, 815, 855, 864, 874
Input range
5 - 25 mm/s
Default value
25 mm/s
730
Input range
3 - 25 mm/s
Default value
25 mm/s
774
Input range
3 - 12 mm/s
Default value
12 mm/s
5.6.7.5
PUMP
5.6.7.5.1
PUMP - Overview
Dialog window: Method
▶ PUMP ▶ Properties... ▶ PUMP - 'Command name'
Command for controlling pumps connected to or built into the Sample
Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 778, 789, 814, 815, 855, 864
Appearance
The command has the following appearance:
Parameters
The parameters for the command PUMP are configured in the following
dialog window:
■