Metrohm tiamo 2.4 Manual - Manual (Page 577)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 561
Gran evaluation
NOTE
This evaluation method is possible only with Titrando and 855.
Gran evaluation
on | off (Default value: off)
If this option is enabled, then titration curves will be evaluated in accor-
dance with the Gran Plot procedure(see Chapter 5.6.3.10.4, page 932).
Initial volume
Volume which is present in the measuring vessel before the command is
started.
Input range 0.01 - 9999.99 mL
Default value 50.00 mL
Lower limit
Value for the lower limit of the Gran evaluation range.
Input range -200.0 - 200.0 µA
Default value -200.0 µA
Upper limit
Value for the upper limit of the Gran evaluation range.
Input range -200.0 - 200.0 µA
Default value 200.0 µA
5.6.3.2.5.8 DET Upol - Additional measured values
Tab: Method ▶ DET Upol ▶ Properties... ▶ Additional measured values
Command name
Name of the command.
Entry 25 characters
A maximum of 6 additional measured values can be defined on this tab.
These values can then be saved together in additional measured value col-
umns with the measured values present in the default settings.