Metrohm tiamo 2.4 Manual - Manual (Page 1639)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
tiamo 2.4
￭￭￭￭￭￭￭￭ 1623
Input range 0 - 100 Hz
Selection off
Default value off
off
For the continuous type of the light source.
[Start]
Starts the measurement of the sample spectrum. Only active if a reference
spectrum is available.
[Stop]
Stops the measurement of the sample spectrum.
8.5 Manual control - Graphical display
Program part: Manual control
All ongoing, manually triggered functions are displayed graphically in the
subwindow for the graphical display.