Metrohm tiamo 2.4 Manual - Manual (Page 1395)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1379
Monitor solution
on | off (Default value: off)
If this option is activated, then the working life of the solution will be
monitored.
Working life
Working life of the solution in days. If a value is entered here, then the
Expiry date will be automatically adapted.
Input range 0 - 999 days
Default value 999 days
Expiry date
Expiry date of the solution. The date can be selected by clicking on in
the Select date dialog window. After a date has been entered the
Working life will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by e-mail
on | off (Default value: off)
If this option is enabled, the message is sent to the address defined under
[E-mail]. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted in addition to
the message defined above.
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the working life has expired then one
of the following actions will be triggered automatically during the start
test:
Selection Record message | Display message | Cancel
determination
Default value Display message