Metrohm tiamo 2.4 Manual - Manual (Page 1398)

6.6 Subwindow Titrants/Solutions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1382 ￭￭￭￭￭￭￭￭
tiamo 2.4
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted in addition to
the message defined above.
Action
The actions can only be edited if monitoring is switched on.
If during titer monitoring it is found that the validity period of the titer has
expired, then one of the following actions will be triggered automatically
during the start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued, then the message
that the validity period has expired will be automatically saved with the
determination.
Cancel determination
The ongoing determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
6.6.3.4 Properties - Titer history
Tab: Configuration ▶ Titrants/Solutions ▶ [Edit] ▶ Properties... ▶ Titer history
History table
The table contains the last 10 titer determinations for the selected solution
and can neither be edited nor sorted. The titer determinations are
arranged chronologically so that the most recent determination is shown
last.
Titer
Titer values are shown in the following colors:
￭ Blue, if the titer has been determined automatically by a method.
￭ Black, if the titer has been entered manually.
￭ Orange, if the titer is outside the warning limits.
￭ Red, if the titer is outside the intervention limits.