Metrohm tiamo 2.4 Manual - Manual (Page 277)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4
￭￭￭￭￭￭￭￭ 261
*.csv (measuring point list)
Data exchange format for the measuring point list with unformatted
text that can be imported into corresponding PC programs. The text
file contains a document header with date/time of the determination
and the determination ID, then the measuring point lists of the sepa-
rate commands are listed one after the other. The command name is
listed first for each measuring point list, followed by a header with the
designations and the units of the measured values of the command.
This is followed by the list of the measuring points, each measuring
point is listed in a separate line and consists of a time indication and all
measured values generated by the command.
[Select fields]
Opens the dialog window Select fields in which the required fields for
the export can be selected, arranged in the required sequence and
renamed.
NOTE
Field selection is only possible for the file types *.csv and *.slk. With
*.mdet and *.xml always all fields will be exported.
[Options]
Opens the dialog window Options, in which the separators can be
defined.
NOTE
The options can only be set for the data types *.csv (comma separa-
ted) and *.csv (measuring point list).
File name
One of the following options can be selected for the definition of the
name of the export file:
Selection Determination ID | Sample identification |
Request on each export | Fixed file name
(append data)
Default value Determination ID
Determination ID
If this option is selected then the name of the export file will be formed
from the unambiguous Determination ID, the Computer name, the
date stamp -YYYYMMDD-HHMMSS and the suffix for the format.