Metrohm tiamo 2.4 Manual - Manual (Page 477)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 461
Identification Description
.ETE End temperature (temperature after the command
has been processed) in °C
.EVT End volume (total dosed volume at the end of the
command) in mL
.FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
.FP{x}.ERC ERC for the fixed endpoint × (1 - 9)
.FP{x}.MEA Measured value for the fixed endpoint × (1 - 9) in mV
.FP{x}.TEM Temperature for the fixed endpoint × (1 - 9) in °C
.FP{x}.TIM Time in s until the fixed endpoint × (1 - 9) is reached
.FP{x}.VOL Volume for the fixed endpoint × (1 - 9) in mL
.HP{x}.MEA Measured value for the HNP × (1 - 9) in mV (HNP =
half neutralization potential)
.HP{x}.TEM Temperature for the HNP × (1 - 9) in °C
.HP{x}.TIM Time in s until the HNP × (1 - 9) is reached
.HP{x}.VOL Volume for the HNP × (1 - 9) in mL
.GP.VOL Volume for the Gran endpoint in mL
.GP.MEA Measured value for the Gran endpoint in the unit of
the measured value
.GP.TEM Temperature for the Gran endpoint in °C
.GP.TIM Time in s until the Gran endpoint is reached
.IME Initial measured value (measured value before start
conditions are processed) in the unit of the measured
value
.ITE Initial temperature (temperature before start condi-
tions are processed) in °C
.LP.CAx Calculated value × (1 - 3) for the last measuring point
in the measuring point list
.LP.ERC ERC for the last measuring point in the measuring
point list
.LP.EXx External value × (1 - 3) for the last measuring point in
the measuring point list