Metrohm tiamo 2.4 Manual User Manual
Page 1154
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1138
■■■■■■■■
tiamo 2.4
time has not been newly entered, then a waiting time that is suitable for
the drift will be calculated automatically according to the following for-
mula:
Input range
0 - 999,999 s
Default value
154 s
Measuring interval
Time interval for entering a measured value in the measuring point list.
Avantes Spectrometer
Input range
0.1 - 999,999.0 s (Increment: 0.1)
Default value
2.0 s
089 Photometer
Input range
0.25 - 999,999.00 s (Increment: 0.25)
Default value
2.0 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range
0 - 4,000 mAU
Selection
off
Default value
off
Measurement without drift control
If the Measurement without drift control option has been selected,
then the following parameters will be displayed:
Measuring time
Duration of the absorbance measurement.
Input range
0 - 999,999 s
Default value
120 s
Measuring interval
Time interval for entering a measured value in the measuring point list.
Avantes Spectrometer
Input range
0.1 - 999,999.0 s (Increment: 0.1)
Default value
2.0 s