Metrohm tiamo 2.4 Manual - Manual (Page 1678)

9.5 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1662 ￭￭￭￭￭￭￭￭
tiamo 2.4
4 Select or enter the name for the backup file in the Backup name
field. If an existing backup file is selected, it will be overwritten.
NOTE
If the backup directory is on a network drive, the backup date
should be added to the backup name, because the backup date
information is not available when the data is restored.
5 Click on [Start].
The manual backup is started and the configuration database is
backed up to the selected directory.
Backing up configuration data automatically
1 Select the Configuration program part.
2 Click on the File ▶ Backup ▶ Automatically menu item.
The Backup configuration data automatically dialog window
opens.
3 Activate the Automatic backup check box.
4 Enter an Interval for backup monitoring or a date for the Next
backup.
5 Select a directory for the backup in the Backup directory field.
6 Click on [OK].
The Backup configuration data automatically dialog window
closes.
The configuration database is automatically saved in the selected
directory at the desired moment.