Metrohm tiamo 2.4 Manual - Manual (Page 67)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4
￭￭￭￭￭￭￭￭ 51
Identifica-
tion Description Commands
.SVS Start volume slope (volume that
was added according to the start
condition "start slope") in mL DET, MET
.SVT Total start volume (volume that
was added according to all three
start conditions) in mL DET, MET, SET,
KFT, STAT
.TC.TC Temperature coefficient of the
conductivity in %/°C MET Cond, MEAS
Cond, CAL Cond
.TC.C0 Coefficient of the Chebyshev pol-
ynomial of the conductivity of the
zero order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C1 Coefficient of the Chebyshev pol-
ynomial of conductivity of the
first order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C2 Coefficient of the Chebyshev pol-
ynomial of conductivity of the
second order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C3 Coefficient of the Chebyshev pol-
ynomial of conductivity of the
third order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C4 Coefficient of the Chebyshev pol-
ynomial of conductivity of the
fourth order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.MIN Minimum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.MAX Maximum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTART Start temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTOP Stop temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond