Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1035)

Brocade Network Advisor SAN User Manual 983
53-1003154-01
Displaying fabric properties from the FCIP Tunnels dialog box
22
Displaying fabric properties from the FCIP Tunnels dialog box
Fabric properties are displayed on the FCIP Tunnels dialog box when you select a fabric.
(
Figure 449 ).
FIGURE 449 Fabric properties on the FCIP Tunnels dialog box
Troubleshooting FCIP Ethernet connections
1. Right-click a blade an Extension Blade or Switch from the Fabric Tree structure or Connectivity
Map, and select Properties.
2. Select the Port tab.
3. Select GigE from the Type drop-down list.
4. Select an Ethernet port.
5. Click Troubleshooting.
The following options are presented:
- IP Ping — Tests connections between a local Ethernet port (ge0 or ge1) and a destination
IP address.
- IP Traceroute — Traces routes from a local Ethernet port (ge0 or ge1) to a destination IP
address.