Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 549)

Brocade Network Advisor SAN User Manual 497
53-1003154-01
Configuration file management
12
Switch Name The name of the source switch to be replicated.
Switch IP Address The IP address of the source switch to be replicated.
Switch WWN The world wide name of the source switch to be replicated.
Name The name of the selected switch.
Device Type The type of device port.
Tag The tag number of the port
Serial # The serial number of the switch.
WWN The switch port’s world wide name.
IP Address The switch port’s IP address.
Domain ID The switch port’s top-level addressing hierarchy of the domain.
Vendor The hardware vendor’s name.
Model The name and model number of the hardware.
Port Count The total number of ports.
Firmware The firmware version.
Location The customer site location.
Contact The primary contact at the customer site.
Description A description of the customer site.
State The port state, for example, online or offline.
Status The operational status of the port.; for example, unknown or marginal.
TABLE 48 Step 4. Select Destination Switches
Field/Component Description
Available Switches table Lists the available switches you can select to be applied to the selected
switches table.
Name The name of the available switch.
Device Type The type of device port.
Tag The tag number of the port.
Serial # The serial number of the switch.
WWN The switch port’s world wide name.
IP Address The switch port’s IP address.
Domain ID The switch port’s top-level addressing hierarchy of the domain.
Vendor The hardware vendor’s name.
Model The name and model number of the hardware.
Port Count The total number of ports.
Firmware The firmware version.
Location The customer site location.
TABLE 47 Step 3. Select Source Switch (Continued)
Field/Component Description