Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 391)

Brocade Network Advisor SAN User Manual 339
53-1003154-01
User-defined performance monitors
7
Viewing product distribution data details
Each bar on the product distribution graph maps directly to one of the five percentage ranges
defined for the distribution performance monitor (refer to
“Distribution performance monitors” on
page 330).
1. Double-click a bar in the graph.
The Monitor_Title Data Details dialog box displays.
2. Review the data.
The product distribution data details include the following fields and components:
• Product — The name of the product affected by the selected measure.
• Measure_Type — This column depends on which measure you select for the monitor.

Memory Utilization Percentage — The memory utilization percentage for the product.

CPU Utilization Percentage — The CPU utilization percentage for the product.

Temperature — The temperature in Celsius for the product.

Fan Speed — The fan speed in RPM for the product.

Response Time — The response time in seconds for the product.

System Up Time — The system up time in days for the product.

Ports Not In Use — The number of ports not in use for the product.

Ping Packet Loss Percentage — The ping packet loss percentage for the product.

AP Client Count — The number of AP clients for the product.
• Fabric — The fabric to which the device belongs.
• Product Type — The type of product (for example, switch).
• State — The product state (for example, Offline).
• Status — The product status (for example, Reachable).
• Tag — The product tag.
• Serial # — The serial number of the product.
• Model — The product model.
• Port Count — The number of ports on the product.
• Firmware — The firmware level running on the product.
• Location — The location of the product.
• Contact — A contact name for the product.
3. Click Close.