Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 641)

Brocade Network Advisor SAN User Manual 589
53-1003154-01
Adapter port WWN virtualization
15
Enabling the FAWWN feature on a switch or AG ports
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Enable button.
The selected switch’s port status is enabled.
4. Click OK.
The Fabric Assigned WWN Confirmation and Status dialog box displays.
5. Click Start to save the changes to the switch.
6. Click Close on the Fabric Assigned WWN Configuration and Status dialog box.
Disabling the FAWWN feature on a switch or AG ports
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Disable button.
The selected switch’s FAWWN feature status is disabled.
4. Click OK.
Auto-assigning a FAWWN to a switch or AG port
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.
3. Click the User button.
The system sets the type to User and the Fabric Assigned WWN parameters are now editable.
4. Enter a valid WWN on the selected switch.
5. Click OK.