Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 323)

Brocade Network Advisor SAN User Manual 271
53-1003154-01
Dashboard overview
7
4. Click OK.
The user-defined dashboard definition details are saved in a .zip file in a location that you
specify.
NOTE
You cannot export an empty dashboard and published widgets.
Importing a user-defined dashboard definition
You can import a user-defined dashboard definition from the file system to the Management
application.
1. Click the Dashboards expand navigation bar.
2. Select a user-defined dashboard you want to share under Dashboard, click Options, and then
select Import.
The Import dialog box displays.
3. Browse the path and click Select. A successfully imported information message displays.
4. Click OK.
The user-defined dashboard definition is imported. If the imported dashboard name already exists,
the imported dashboard name is renamed as <Dashboard name_1>, <Dashboard name_2>, and
so on in an incremental sequence. The imported dashboard becomes the active dashboard.
Setting the dashboard display
You can set the dashboard to minimize or expand all status widgets and performance monitors as
well as return to the default settings.
Select one of the following options from the dashboard display list:
• Collapse All — Select to minimize all widgets and monitors on the dashboard.
• Expand All — Select to expand all widgets and monitors on the dashboard.
• Reset to Default — Select to reset the dashboard to the default display settings.
Customizing the dashboard widgets and monitors
1. From the dashboard, click the Customize Dashboard icon.
The Customize Dashboard dialog box displays.
2. Click the Status tab.
The preconfigured general status widgets display.
3. Select the Display check box in the General Status Widgets list for each status widget you want
to add to the dashboard.
Clear the check box to remove the associated status widget from the dashboard.
The General Status Widgets list contains the following additional information: