Viewing additional san product data, Status widget, Viewing – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 342: Additional san product data
290
Brocade Network Advisor SAN User Manual
53-1003154-01
Status widgets
7
Viewing additional SAN product data
1. Double-click a section in the SAN Status widget.
The SAN Products - Status dialog box (where Status is the section of the widget you selected)
displays with the following fields and components:
•
Product — The product name.
•
Fabric — The fabric associated with the product.
•
Product Type — The type of product.
•
State — The state for the product and the port.
•
Status — The status for the product and the port.
•
Tag — The tag number of the product.
•
Serial # — The serial number of the product.
•
Model — The model number of the product.
•
Port Count — The number of ports on the product.
•
Firmware — The firmware version of the product.
•
Location — The physical location of the product. This field is editable at the fabric level.
•
Contact — The name of the person or group you should contact about the product. This
field is editable at the fabric level.
2. Right-click any row in the table to access the corresponding shortcut menu for the device. For
more information about shortcut menus, refer to
3. Click Close.
Status widget
The Status widget (
) displays the number of products managed and the number of
events within the selected event time range.
FIGURE 124
Status widget
The Status widget displays the following items for each product license: