Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1654
1602
Brocade Network Advisor SAN User Manual
53-1003154-01
Database tables and fields
H
TABLE 171
HBA_PORT_DETAIL
Field
Definition
Format
Size
DEVICE_PORT_ID
Device port id acts as the primary key
int
PERSISTENT_BINDING
Persistent binding value of the port. With persistent
binding (on the host), one can bind a LUN to a
specific device file, thus making sure devices
reappear on the same device files after reboots.
0 – disable
1 – enabled
smallint
FABRIC_NAME
Principal switch WWN of the Fabric to which the port
is associated with.
varchar
64
BOOT_OVER_SAN
Flag to indicate whether boot over SAN is enabled or
not..
The default value is 0.
smallint
BOOT_OPTION
Boot option for the port. Possible values are 0 -
AUTO_DISCOVERED_FROM_FABRIC , 1 -
FIRST_VISIBLE_LUN, 2 - USER_CONFIGURED_LUN
smallint
BOOT_SPEED
Boot speed for the port in Gbps. Possible values are
0 - AUTO_NEGOTIATE and 2, 4, 8, 16 Gbps. The
default value is 0.
int
BOOT_TOPOLOGY
Boot topology for the port. Possible values are 0 -
Point to Point , 1 - Loop. The default value is 1.
int
BOOTUP_DELAY
On starting system how long system needs to wait for
user action. Configured value ranges 0,1,2,5 and 10
minutes. Default value is 0.
int
BB_CREDIT
The maximum number of receive buffer.
The default value is 8.
int
FRAME_DATA_FIELD_SIZE
The default value is 512.
int
HARDWARE_PATH
Indicates whether MPIO is enabled or disabled
V_PORT_COUNT
Number of logical ports.
The default value is 0.
int
QUEUE_DEPTH
The number of I/O operations that can be run in
parallel on a device.
The default value is 0.
int
INTERRUPT_CONTROL_COA
LESCE
Indicates whether interrupt control is on or off.
The default value is 0.
smallint
INTERRUPT_CONTROL_LAT
ENCY
Sets the interrupt control latency value..
The default value is 0.
int
INTERRUPT_CONTROL_DEL
AY
Sets the interrupt control delay value..
The default value is 0.
int
BEACON_STATE
Indicates whether beaconing is on or off..
The default value is 0.
smallint
LINK_BEACON_STATE
Indicates whether link beaconing is on or off..
The default value is 0.
smallint