Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1570)

1518 Brocade Network Advisor SAN User Manual
53-1003154-01
Zoning troubleshooting
G
Zoning activation message displays for a long
time, but zone configuration is not activated. Telnet zoning can take a long time. To improve speed, open the Discover Setup dialog box
(Discover > Setup) and add the IP address for the device to the Selected Individual
Addresses list.
Out of memory error caused by running a
zoning report for a large zone configuration
(1 MB) in a medium-sized SAN due to a third
party tool. You must increase the client memory allocation by completing “Configuring memory
allocation settings” on page 120.
Problem Resolution