Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 604)

552 Brocade Network Advisor SAN User Manual
53-1003154-01
Port Auto Disable
12
Unblocking ports
NOTE
Port Auto Disable requires devices running Fabric OS 6.3 or later.
To unblock ports, complete the following steps.
1. Select Monitor > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to unblock ports from the Fabric list.
3. Select Blocked Ports from the Show list.
4. Select the device on which you want to unblock ports.
5. Click Unblock (under Port).
6. Click OK on the Port Auto Disable dialog box.