Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1384)

1332 Brocade Network Advisor SAN User Manual
53-1003154-01
MAPS interoperability with other features
33
TABLE 108 Fabric Watch supported RAS event IDs
Category Measure Unit label RAS event ID
Port Health CRC — CRC errors Count 1182
ITW — Invalid transmit words Count 1178
LOSS_SYNC — Loss of synchronization Count 1166
LF — Link failure Count 1162
LOSS_SIGNAL — Signal loss Count 1170
PE — Protocol errors Count 1174
LR — Link reset Count 1198
C3TXTO — Class 3 timeout Count 1202
STATE_CHG — State changes Count 1194
CURRENT — SFP transceiver current mA 1046
1047
RXP — SFP transceiver receive power microWatts 1038
1039
TXP — SFP transceiver transmit power microWatts 1042
1043
VOLTAGE — SFP transceiver voltage mV 1050
1051
SFP_TEMP — SFP transceiver temperature Degrees celsius 1034
1035
PWR_HRS 1 — SFP transceiver power on hours Count 1053
1054
Switch Policy Status BAD_PWR — Absent or faulty power supply Count 1426
1427
1428
1429
BAD_TEMP — Temperature sensors outside range Count 1430
BAD_FAN — Absent or faulty fans Count 1431
FLASH_USAGE — Flash usage % 1435
MARG_PORTS — Percentage of marginal ports % 1436
FAULTY_PORTS — Percentage of faulty ports % 1437
MISSING_SFP — Percentage of missing SFP transceivers % 1438
ERR_PORTS — Percentage of error ports % 1448
WWN_DOWN — WWN card faulty or down Count 1432
DOWN_Core — Core blade monitoring Count 1447
FAULTY_BLADE — Faulty blades Count 1434
HA_SYNC — HA monitoring Count 1433