Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1302
1250
Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing a configuration policy manager report
31
3. Click Report.
NOTE
If you have run this policy more than once, the latest report displays.
The Policy_Name - Configuration Policy Manager Report displays (
) in a web
browser.
4. Review the report details:
•
Name — Name of the configuration policy manager report.
•
Date — Date and time the report was finished.
•
Export button — To export a report, refer to
“Exporting a configuration policy manager
•
E-Mail button — To e-mail a report, refer to
•
Status Summary — Number of checks that passed, partially failed, failed, not applicable,
or unknown.
When a policy status fails or partially fails, the status is highlighted in pink.
•
Trigger — Trigger for the report. Valid results include Manual, Event Action, and Scheduled.
•
Run Time — Date and time the report was triggered.
•
Individual_Policy_Checks — Name of the policy check and a table displaying the results of
the check. The following information is included in the report data for each policy check:
Management Check — Displays the status of the management check. The management
check provides the following information:
Name — Name of the management check.
Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Fabric Checks — Fabric checks provide the following information for each selected check:
Name — Fabric name.
Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Fabric checks include the following options:
Check zoning is enabled
Check that all zones belong to at least one zone configuration
Check the number of initiator ports zoned to each storage port is less than
Configured_Value. This check provides the following additional detail for this check:
-
Storage Port — WWN of the storage port.
-
Initiator Count — Number of initiator ports zoned to the storage port.
-
Initiator Port — WWN of the initiator port.
-
Zone — Zone name containing the initiator/storage port zoning pair.
Check zones that do not contain any online member. This check lists the zones that
contain only offline members.