Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 848)

796 Brocade Network Advisor SAN User Manual
53-1003154-01
Creating a new encryption group
20
• Username: Activates the Primary and Backup Key Vault User Names for completion.
• None: Deactivates Primary and Backup Key Vault User Names and password fields.
6. Select the Certificate Type. Options are:
• CA Signed: The switch KAC certificate is signed by a CA, imported back on the switch and
registered as a KAC certificate. The CA will be registered as a key vault certificate on the
switch. If you selected CA Signed, the wizard opens the Specify Public Key Certificate (KAC)
File Name dialog box (
Figure 352 ). Go to Step 7.
• Self Signed: The self-signed certificates are exchanged and registered on both ends. The
key vault certificate is registered on the switch and the switch KAC certificate is registered
on the key vault. If you selected Self Signed, the wizard opens the Specify Master Key File
Name dialog box. (Refer to
Figure 353 .) Go to Step 8.
7. Click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to Figure 352 .)
FIGURE 352 Specify Public Key Certificate (KAC) File Name dialog box
8. Enter the name of the file where the switch’s public key certificate is stored, or browse to the
desired location, then click Next.
The Specify Master Key File Name dialog box displays. (Refer to Figure 353 .)