Configuring snmp v3 credentials, Software configuration – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 160
108
Brocade Network Advisor SAN User Manual
53-1003154-01
Software Configuration
4
Configuring SNMP v3 credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays (
).
3. Enter the SNMP v3 name (case sensitive, 1 to 16 characters) to identify the credentials in the
User Name field.
Allows all printable ASCII characters.
4. Select on of the following authentication protocols from the Auth Protocol list.
•
•
HMAC_SHA (continue with
)
•
)
5. Enter the SNMP v3 authentication password (case sensitive, 1 to 16 characters) in the Auth
Password and Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
6. Select one of the following privacy protocol types from the Priv Protocol list.
•
CBC-DES (continue with
)
•
CFB_AES-128 (continue with
•
CFB_AES_256 (continue with
)
•
)
7. Enter the privacy password (case sensitive, 8 to 16 characters) in the Priv Password and
Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
8. Click Apply or OK to save your work.
Software Configuration
The Management application allows you to configure the following software settings:
•
— Support settings to allow enhanced diagnostics.
•
— A port for communication between the client and server.
•
— IP configuration settings.
•
— Memory allocation for the client and server.
•
Product communication settings
— Connections between the server and SAN switches or IP
products.
•
— Internal or external FTP or SCP server settings.
•
— Server port settings.
•