Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 328)

276 Brocade Network Advisor SAN User Manual
53-1003154-01
Dashboard overview
7
FIGURE 116 Edit Scopes dialog box
4. Click Add.
A new network scope displays in the Network Scopes list.
5. Enter a name for the scope in the Name field.
6. Select one of the following options:
• Fabrics — Select to create your network from one or more fabrics.
• Products — Select to create your network from one or more products or product groups.
• Ports — Select to create your network from one or more ports or port groups.
7. Select one or more the objects you want to include in the network from the Available Targets
list and click the right arrow button.
The objects display in the Selected Targets list. To remove an object from the Selected Targets
list, select it and click the left arrow button.
8. Click OK to save your changes and close the Edit Scopes dialog box.
Editing a user-defined network scope
You can edit any user-defined network scope.
1. Click the Scope list.
2. Click Manage Network Scopes.
The Edit Scopes dialog box displays a list of existing user-defined network scopes in the
Network Scopes list.
3. Select the network scope you want to edit in the Network Scopes list.
4. Change the name for the scope in the Name field, if needed.