Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 445
Brocade Network Advisor SAN User Manual
393
53-1003154-01
Viewing Call Home configurations
9
•
Call Home Centers list — The Call Home centers, products assigned to the Call Home
centers, and event filters assigned to the Call Home centers and products. This list
displays the following information:
Centers — A tree with Call Home centers as the parent node, assigned products as
subnodes, and event filters as the child node to the assigned products.
Enabled check box — Select the check box to enable the associated Call Home center
or clear the check mark to disable the Call Home center. By default, all check boxes
are selected during a fresh install.
Support Save check box — Select the check box to enable supportSave, which collects
diagnostic information on Fabric OS switches.
IP Address — The IP address of the product.
Node WWN — The node WWN of the product.
Fabric Name — The name of the fabric.
Vendor — The vendor of the product.
Call Home Status — One of the following Call Home statuses for the product:
-
Enabled — The product is manageable and Call Home is enabled.
-
Disabled — The product is manageable and Call Home is disabled.
-
Not Manageable — The product is discovered but not manageable.
-
Server Not Registered — The server is not registered to receive Call Home events
from the product.
NOTE
Call Home status only displays for Fabric OS products.
DomainID — The domain ID of the product.
Product Type — The type of product (switch, Layer 2 switch, router, or director).
•
Edit Centers button — Select a call home center in the Centers list anc click Edit to open
the Configure Call Home Center dialog box and modify Call Home center information (refer
to
•
Show/Hide Centers button — Click to open the Centers dialog box and add or delete a Call
Home center (refer to
2. Click OK to close the Call Home dialog box.