Supported port configurations for each feature, Notes on supported configurations – Brocade Network Advisor SAN User Manual v12.3.0 User Manual

Page 1182

Advertising
background image

1130

Brocade Network Advisor SAN User Manual

53-1003154-01

Flow Vision flows

29

Supported port configurations for each feature

Table 90

lists the supported configurations for each Flow Vision feature using only the basic flow

parameters (ingress port and source device, egress port and destination device).

Notes on supported configurations

If you are using at least one advanced parameter (LUN, frame type, or bidirectional), then
feature-specific rules apply. Refer to the individual Flow Vision features for specific details.

Neither ranges nor lists are supported for any parameter.

scsi2reserve

Only SCSI 2 reserve command frames

scsi3reserve

Only SCSI 3 reserve command frames

scsi2release

Only SCSI 2 release command frames

scsi3release

Only SCSI 3 release command frames

scsiresrel2

Only SCSI 2 reserve-release command frames

scsiresrel3

Only SCSI 3 reserve-release command frames

scsitur

Only SCSI test unit ready frames

scsicmdsts

Only SCSI command status frames
NOTE: This parameter is valid only for Flow Mirror. It implicitly assumes bidirectional flow

and looks for both SCSI command and status frames.

scsigoodstatus

Only SCSI status frames with status marked as good (all 0s (zeros) in status byte)

scsicheckstatus

Only SCSI status frames with check status (Check Condition, Busy, Reservation Conflict,
Task Full Set)

scsiinquiry

Only SCSI inquiry frames

scsiresvconflict

Only SCSI status frames with reservation conflict set

scsixferrdy

Only SCSI FCP XFER_RDY (transfer ready) frames

TABLE 90

Port configurations supported in Flow Vision

Feature

Platforms

Switch Configuration Mode

16 Gbps-capable
Fibre Channel

1

1.

16 Gbps-capable platforms include the FC8-32E and FC8-48E blades.

8 Gbps-capable
Fibre Channel

Access Gateway

Virtual Fabric

Flow Monitor

Supported
(E_Ports, EX_Ports,
F_Ports, and
XISL_Ports)

Supported
(E_Ports, EX_Ports,
F_Ports, and
XISL_Ports)

Supported
(F_Ports only)

Supported

Flow Generator

Supported
(SIM-Ports only)

Supported (Destination
SIM-Ports only)

Not Supported

Supported

Flow Mirror

Supported (F_Ports and
F_Port trunks)

Not Supported

Not Supported

Supported

TABLE 89

Supported frame type parameters (Continued)

Frame type parameter Frames counted

Advertising