Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 959)

Brocade Network Advisor SAN User Manual 907
53-1003154-01
Zoning configuration
21
5. If the active zone configuration names are the same in each fabric, then load the offline
repository, and activate the zone configuration on each fabric.
6. If the active configuration names are different in each fabric, rename the zone configurations
to be the same, and copy the zones.
7. Ensure that the active configurations are the same.
a. Load the newly created offline zone database.
b. Add the active zones to the zone configuration that is the active configuration on the other
fabric.
c. Rename the inactive configuration.
Merging two zone databases
If a zone or zone configuration is merged, the resulting zone or zone configuration includes all
members that were marked for addition or removal as well as all members not otherwise marked.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select Compare from the Zone DB Operation list.
The Compare/Merge Zone DBs dialog box displays, as shown in Figure 422 .
FIGURE 422 Compare/Merge Zone DBs dialog box
3. Select a database from the Reference Zone DB list.