Port commissioning, Refreshing port optics – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 576
524
Brocade Network Advisor SAN User Manual
53-1003154-01
Port commissioning
12
•
Powered on Years (Hours) — The powered on time in years and hours for 16 Gbps capable
ports. Empty for unsupported ports.
NOTE
Requires a 16 Gbps capable port running Fabric OS 7.0 or later.
•
FC Speed (GB/s) (Fabric OS 7.0 or later) — The FC port speed; for example, 4 Gbps.
•
FC Speed (MB/s) (Fabric OS 6.4 or earlier) — The FC port speed; for example, 400 Mbps.
•
Distance — The length of the fiber optic cable.
•
Vendor — The vendor of the SFP.
•
Vendor OUI — The vendor’s organizational unique identifier (OUI).
•
Vendor PN — The part number of the SFP.
•
Vendor Rev — The revision number of the SFP.
•
Serial # — The serial number of the SFP.
•
Data Code — The data code.
•
Media Form Factor — The type of media for the transceiver; for example, single mode.
•
Connector — The type of port connector.
•
Wave Length — The wave length.
•
Encoding — Displays how the fiber optic cable is encoded.
3. To view port properties, select a row and click Properties.
4. Sort the results by clicking on the column header.
5. Rearrange the columns by dragging and dropping the column header.
6. Click Close to close the Port Optics (SFP) dialog box.
Refreshing port optics
To refresh port optics, click Refresh.
The Management application retrieves updated port optic information.
Port commissioning
NOTE
Port commissioning is only supported on FICON devices running Fabric OS 7.1 or later.
Port commissioning provides an automated mechanism to remove an E_Port or F_Port from use
(decommission) and to put it back in use (recommission). This feature identifies the target port and
communicates the intention to decommission or recommission the port to those systems within
the fabric affected by the action. Each affected system can agree or disagree with the action, and
these responses are automatically collected before a port is decommissioned or recommissioned.
Note the following restrictions of port commissioning:
•
The local switch and the remote switch on the other end of the E_Port or F_Port must both be
running Fabric OS 7.1.0 or later.
•
Port commissioning is not supported on links configured for encryption or compression.