Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1255
Brocade Network Advisor SAN User Manual
1203
53-1003154-01
Flow Mirror
29
3. Clear the Monitor check box.
4. Select the Mirror check box.
5. Select the Local Flow Mirror option. By default, CPU Mirroring is enabled.
6. Select the Persist over switch reboots check box to persist this flow definition over reboots.
7. Select the Activate all selected features check box to immediately activate the flow after
creation.
8. Enter the source device (H1) in the Source field.
9. Enter an asterisk (*) in the Destination field.
10. Enter the mirror port number in the Mirror field or click the ellipsis button to select a port from
the list.
Only supported on 16 Gbps-capable ports on devices running Fabric OS 7.3 or later.
To select a port from a list, refer to
“Selecting a mirror port from a list of available ports”
11. Enter the frame type (scsismd) in the Frame Type field.
To select a frame type from a list, click the ellipsis button. Refer to
on page 1129" for a list of the supported frame type parameters.
12. Click OK to save the flow definition.
When the flow definition activates, the Flow Vision dialog box displays with the new flow
selected (highlighted) in the Flow Definitions table. To review the sub-flow data for the selected
flow, refer to