Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 110)

58 Brocade Network Advisor SAN User Manual
53-1003154-01
Host discovery
3
10. Enter your user name in the User ID field.
The HCM agent default is admin. Leave this field blank for the CIM server.
11. Enter your password in the Password field.
The HCM agent default is password. Leave this field blank for the CIM server.
12. Repeat step 5 through step 11 for each Host you want to discover.
13. Click OK on the Add Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A host group displays in the Discovered Hosts table of the Discover Host Adapters dialog box.
The discovery status is updated dynamically.
14. Click Close on the Discover Host Adapters dialog box.
Importing Hosts from a CSV file
To discover Hosts by importing a CSV file, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 15 Add Host Adapters dialog box
3. Enter a discovery request name (such as MyFabric) in the Discovery Request Name field.
4. Click Import.
The Open dialog box displays.