Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1373)

Brocade Network Advisor SAN User Manual 1321
53-1003154-01
Event logs
32
Finding the device associated with an event
You can locate a device on which an event was triggered by right-clicking the event and selecting
Locate.
The device displays highlighted in the Product List and Topology Map.
NOTE
Locate does not locate devices in automatically collapsed fabrics. You must expand the fabric
(right-click and select Expand) and repeat the locate command.
Copying part of the Master Log
You can copy data from logs to other applications. Use this method to analyze or store the data
using another tool.
To copy part of the Master Log, complete the following steps.
1. Select the rows you want to copy in the Master Log:
• To select contiguous rows, select the first row you want to copy, press Shift, and click the
contiguous row or rows you want to copy.
• To select non-contiguous rows, select the first row you want to copy, press CTRL, and click
the additional row or rows you want to copy.
2. Right-click one of the selected rows and select Table > Copy Rows.
3. Open the application to which you want to paste the data.
4. Click where you want to paste the data.
5. Press CTRL+V (or select Edit > Paste from the other application). All data and column headings
are pasted.
Copying the entire Master Log
You can copy the entire Master Log to other applications. Use this method to analyze or store the
data using another tool.
To copy the entire Master Log, complete the following steps.
1. Right-click an entry in the Master Log.
2. Select Table > Copy Table.
3. Open the application to which you want to paste the data.
4. Click where you want to paste the data.
5. Press CTRL+V (or select Edit > Paste from the other application). All data and column headings
are pasted.