Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 142)

90 Brocade Network Advisor SAN User Manual
53-1003154-01
Event storage settings
4
Disabling SAN Ethernet loss events
To disable Ethernet loss events, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Ethernet Loss Events in the Category list.
3. Clear the Enable events for ethernet loss check box.
4. Click Apply or OK to save your work.
Event storage settings
You can configure the maximum number of historical events save to the repository, how long the
events will be retained, as well as whether to store historical events to a file before purging them
from the repository.
Configuring event storage
To configure event storage, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Event Storage in the Category list ( Figure 27 ).
FIGURE 27 Options dialog box (Event Storage pane)
3. Enter the maximum number of events you want to be retained in the repository in the
Maximum Events field.
Depending on your installation, the maximum number of events stored are as follows:
• Professional — 1 through 100,000
• Professional Plus — 1 through 1,000,000
• Enterprise — 1 through 10,000,000
Default is 50,000. Older events are purged at midnight on the date the maximum event limit is
reached regardless of the retention days.