Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 798)

746 Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
20
Creating a server certificate
1. From the Security tab, select CAs & SSL Certificates > SSL Certificates.
The Certificate and CA Configuration page displays. (Refer to Figure 290 .)
FIGURE 290 KeySecure Certificate and CA Configuration page
2. Under Create Certificate Request, enter your organization information in the fields provided,
then click Create Certificate Request. (The example is using “Safenet75ServerCert” as the
server certificate name.)
After the page refreshes, the new certificate information is displayed in the Certificate List
table. (Refer to
Figure 291 .)