Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 120)

68 Brocade Network Advisor SAN User Manual
53-1003154-01
VM Manager discovery
3
FIGURE 19 Discover VM Managers dialog box
2. Click Add.
The Add VM Manager dialog box displays.
FIGURE 20 Add VM Manager dialog box
3. Enter the IP address or host name in the Network Address field.
4. Enter the VM manager port number in the Port field.
5. Enter the VM manager username in the User ID field.
6. Enter the VM manager password Password field.
7. Select the Enable display of network information in vSphere client check box to enable
vSphere client plug-in registration.
Clear to disable vSphere client plug-in registration.