Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 715)

Brocade Network Advisor SAN User Manual 663
53-1003154-01
Security configuration deployment
17
Deploying a security configuration on demand
To deploy a security configuration immediately, complete the following steps.
FIGURE 257 Deploy to Product/Ports dialog box
1. Choose one of the following options:
• Deploy now — Select to deploy the configuration immediately on the product or port
without saving the deployment definition.
• Save and deploy now — Select to deploy the configuration immediately on the product or
port and save the deployment definition for future deployment.
2. Select one of the following save configuration options:
• Save to running — Select to update the running configuration; however, the deployment is
not saved to the product’s flash memory.
• Save to running and startup — Select to update the running configuration as well as save
the deployment configuration to the product’s flash memory. Selecting this option is the
equivalent to a write memory command on the product CLI.
• Save to running and startup then reboot — Select to update the running configuration,
save the deployment configuration to the product’s flash memory, and reboot the product.
Selecting this option is the equivalent to entering a write memory and a reload command
on the product CLI.
3. Enter a name for the deployment in the Name field.
4. Enter a description for the deployment in the Description field.
5. Select one or more ports or products to which you want to deploy the configuration in the
Available Targets list and click the right arrow button to move them to the Selected Targets list.
6. Click OK on the Deploy to Products - Layer 2 ACL dialog box.