Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 407)

Brocade Network Advisor SAN User Manual 355
53-1003154-01
SAN tab overview
8
Port Display buttons
The Port Display buttons are located at the top right of the Product List and enable you to configure
how ports display. You have the option of viewing connected (or occupied) product ports,
unoccupied product ports, or attached ports. Not enabled until you discover a fabric or host.
NOTE
Occupied/connected ports are those that originate from a device, such as a switch. Attached ports
are ports of the target devices that are connected to the originating device.
FIGURE 152 Port Display buttons
1. Show/Hide Occupied Port — Displays or hides the ports of the devices in the fabrics (present in
the connectivity map) that are connected to other devices.
2. Show/Hide Attached Port — Displays or hides the attached ports of the target devices.
3. Show/Hide Unoccupied Port — Displays or hides the ports of the devices (shown in the
connectivity map) that are not connected to any other device.
Connectivity Map toolbar
The Connectivity Map toolbar is located at the top right side of the View window and provides tools
to export the topology, to zoom in and out of the Connectivity Map, collapse and expand groups,
and fit the topology to the window. Not enabled until you discover a fabric.
FIGURE 153 The Connectivity Map toolbar
1. Export — Use to export the topology to a PNG file.
2. Zoom In — Use to zoom in on the Connectivity Map.
3. Zoom Out — Use to zoom out on the Connectivity Map.
4. Fit in View — Use to scale the map to fit within the Connectivity Map area.
5. Expand — Use to expand the map to show all ports in use on a device.
6. Collapse — Use to collapse the map to show only devices (hides ports).
1 2 3
5 6 1 2 3 4