Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1142)

1090 Brocade Network Advisor SAN User Manual
53-1003154-01
SAN end-to-end monitoring
28
SAN end-to-end monitoring
Procedures in this section pertain to end-to-end monitoring using the legacy End-to-End Monitor
feature instead of using Flow Vision to create end-to-end monitors.
For systems using Fabric OS version 7.2 or later, when you select a device or device port, and then
select Monitor > Performance > End-to-End Monitors, a message displays that you can use Flow
Vision to provide End-to-End monitoring. You have these options:
• To use Flow Vision, delete existing monitors, then use the Add Flow Definition dialog box to
define an initiator and target port pair for monitoring. Refer to
Chapter 29, “Flow Vision” for
more information.
• Clicking OK, opens the legacy Set End-To-End Monitors dialog box.To use the legacy End-to-End
Monitor feature, you must deactivate existing flows defined for the switch for Flow Vision.
Refer to the following important notes when using this feature:
• For systems using Fabric OS version 7.2 or later, you can create end-to-end monitors using the
Flow Vision feature. Refer to
Chapter 29, “Flow Vision” for details.
• End-to-end monitoring requires a Fabric OS device.
• An end-to-end monitor and a Top Talker monitor cannot be configured on the same fabric or
external F_Port application-specific integrated circuit (ASIC). You must delete the Top Talker
monitor before you configure the end-to-end monitor.
Current FC SNMP .1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3
Rx Power FC SNMP .1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4
Tx Power FC SNMP .1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5
Invalid Oredered Set FC SNMP .1.3.6.1.3.94.4.5.1.45
BB Credit Zero FC SNMP 1.3.6.1.3.94.4.5.1.8
Truncated Frames FC SNMP 1.3.6.1.3.94.4.5.1.47
FEC Corrected Blocks FC SNMP 1.3.6.1.4.1.1588.2.1.1.1.27.1.31
FEC Uncorrected Blocks FC SNMP 1.3.6.1.4.1.1588.2.1.1.1.27.1.32
Latency FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.5
Dropped Packets FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.3
Link Retransmits FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.2
Timeout Retransmits FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.9
Fast Retransmits FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.10
Duplicate Ack Received FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.11
Window Size RTT FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.12
TCP Out of Order Segments FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.13
SlowStart Status FCIP SNMP .1.3.6.1.4.1.1588.4.1.1.14
CRC Errors EE Monitors HTTP PortCRC (variable from the return html file)
TABLE 85 Performance counters
Counter name Type Protocol Source OID value