Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 378)

326 Brocade Network Advisor SAN User Manual
53-1003154-01
User-defined performance monitors
7

Slow Start Status — The number of slow starts.

Current Compression Ratio — The current compression ratio for the FCIP tunnel.
- IP

Errors — The number of errors.

Discards — The number of discarded frames.

Receive EOF — The number of end-of-frames received.

Underflow Errors — The number of underflow errors.

Overflow Errors — The number of overflow errors.

Alignment Errors — The number of alignment errors.

Runtime Errors — The number of run time errors.

Too Long Errors — The number of too long frame errors.

- Wireless

Dropped Events — The number of dropped events.

MAC Errors — The number of MAC errors.

Back Packets Received — The number of bad packets received.

Tx Errors — The number of transmit errors.
• Traffic flows
- SCSI

Read Frame Count (frames) — The SCSI read command frame count as reported in the
last data point received for the flow.

Write Frame Count (frames) — The SCSI write command frame count as reported in
the last data point received for the flow.

Read Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Write Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Read Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Write Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Read Data Rate (Mbps) — The SCSI read frame in megabytes per second rate as
reported by the last data point.

Write Data Rate (Mbps) — The SCSI write frame rate in megabytes per second as
reported by the last data point.
- Frame

Transmit Frame Count (frames) — The transmit frame count as reported in the last
data point received for the flow.

Receive Frame Count (frames) — The received frame count as reported in the last data
point received for the flow.

Transmit Frame Rate (f/s) — The transmit frame rate per second as reported in the
last data point received for the flow.

Receive Frame Rate (f/s) — The received frame rate per second as reported in the last
data point received for the flow.

Transmit Word Count (bytes) — The transmit word count in bytes as reported in the last
data point received for the flow.