Importing hosts from a fabric – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 112
60
Brocade Network Advisor SAN User Manual
53-1003154-01
Host discovery
3
Importing Hosts from a fabric
To discover a Host from a discovered fabric, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 16
Add Host Adapters dialog box
3. Enter a discovery request name (such as MyFabric) in the Discovery Request Name field.
4. Select Hosts in Fabrics from the list.
5. Select All fabrics or an individual fabric from the host list.
6. Click Add.
All hosts that are part of a managed fabric and have a registered host name display in the host
list. If no host with a registered host name exists, an error message displays. Click OK to close
the error message.
7. Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
•
To configure WMI server credentials, select the Windows Management Instrumentation
(WMI) option. Continue with
.