Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 792)

740 Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a TKLM appliance
20
11. Import the server CA certificate and register TKLM on the encryption Group Leader nodes.
Refer to “Importing the TKLM certificate into the group leader” on page 742.
12. Enable the encryption engines.
Exporting the Fabric OS node self-signed KAC certificates
Each Fabric OS node generates a self-signed KAC certificate as part of the node initialization
process as described under
“Encryption node initialization and certificate generation” . These
certificates must be exported from each switch and stored on a local LINUX host to make them
available for importing to TKLM.
1. Select a switch from the Encryption Center Devices table, then select Switch > Export
Certificate from the menu task bar.
The Export Signed Certificate dialog box displays.
2. Select Signed switch certificate, then click OK.
A dialog box displays allowing you to save the signed certificate in .pem format in My
Documents on your work station. Make a note of this location.
Converting the KAC certificate format
The KAC certificate exported from the encryption switch is in .pem format. It is automatically
converted to a .der format during the export process; however, if you need to manually convert the
file before importing it to the TKLM server, you can do so by completing the following steps:
1. Go to openssl utility.
2. Run
openssl x509 -outform der -in KAC_Certificate_Name.pem -out
KAC_Certificate_Name.der
.
Establishing a default key store and device group on TKLM
To establish a default key store and Fabric OS device group on TKLM, complete the following steps:
1. Obtain the necessary user credentials, then log in to the TKLM user interface.
2. Select Advanced Configuration > Keystore.
The Keystore page displays.
3. Click OK to accept the default keystore settings.
Adding a device to the device group
After you have established a default key store and Fabric OS device group on TKLM, add a
Fabric OS device to the device group.
1. Select Tivoli Key Lifecycle Manager > Welcome.
The device group BRCD_ENCRYPTOR you just created is displayed in the Administration panel.
2. Click Go.
The Configure Keys page displays. This page identifies this step as Step Two: Identify Drives.