Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1267)

Brocade Network Advisor SAN User Manual 1215
53-1003154-01
Flow Vision interoperability with other features
29
Bottleneck Detection integration with Flow Vision
You can create a flow definition for a single bottlenecked port. For more information about
Bottleneck Detection, refer to
“Bottleneck detection” on page 1765".
Creating a bottlenecked port flow definition
1. Select a port from the Products/Ports list in the Bottlenecks dialog box.
2. Click Add Flow.
The Add Flow Definition dialog box displays with fields and options populated based on the
port selected on the Bottlenecks dialog box.
Table 100 details the fields and options populated based on the port selected on the
Bottlenecks dialog box.
TABLE 100 Add Flow Definition dialog box fields and options populated per Bottlenecks selection
Port selected Options and fields populated
E_Port
•
Target Switch = Selected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected port number
•
Direction = Bidirectional
Initiator
•
Target Switch = Selected port’s connected switch
•
Source Device = Initiator port ID
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected port’s connected switch port number
•
Direction = Bidirectional
Target
•
Target Switch = Selected port’s connected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = Target port ID
•
Ingress Port = Selected port’s connected switch port number
•
Direction = Bidirectional
Any port other than
E_Port, initiator, or
target port
•
Target Switch = Selected switch
•
Source Device = * if port is on a 16-Gbps switch, otherwise empty
•
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
•
Ingress Port = Selected switch port number
•
Direction = Bidirectional