Report content and functions – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 313
Brocade Network Advisor SAN User Manual
261
53-1003154-01
Reports
6
Report content and functions
Each report contains the following information:
•
The name of the report displayed at the top of the report.
•
The date and time the report was generated.
•
The report data, presented in a tabular format.
Depending on the report type, you can perform the following functions:
•
Sort a table by clicking a column head. Click a column head again to reverse the sort order.
•
Launch a more detailed report by clicking a link within the report.
•
Navigate through the report using a table of contents (TOC), by clicking the TOC icon in the
Report toolbar.
•
Export report data to a CSV, PDF, or XLS file by clicking the Export Data icon in the toolbar (refer
to
“Downloading a generated report”
“Exporting data from the report”
•
Navigate through the report by using the following icons in the Report toolbar.
Length Cu
The length of the copper cable (for distances greater than 1 meter, where optimum
performance is required).
Vendor Name
The vendor of the extended link.
Vendor OUI
The vendor’s organizational unique identifier (OUI).
Vendor Part
The part number of the extended link.
Revision
The revision level of the extended link.
Wavelength
The wavelength translation, which enables longer reach through lower attenuation.
Options
Displays details about the transceiver; for example, the type of port connector, type of
transceiver, and enable/disable status.
BR Max
The upper bit rate limit at which the SFP transceiver meets its specifications.
BR Min
The lower bit rate limit at which the SFP transceiver meets it specifications.
Serial #
The serial number of the SFP transceiver.
Date Code
The date the SFP was manufactured transceiver.
Temperature (c)
The port temperature, measured in Celsius.
Bias Current (mA)
The low-level DC current (the Bias Current), measured in mA.
Tx Power (mW)
The transmitted power, measured in mW.
Rx Power (mW)
The received power, measured in mW.
Voltage (V)
The voltage; for example, 1.8V, 3.3V, or 5.0V.
Alarm/Warning
Indicates whether an alarm has been triggered.
TABLE 25
Adapters Faulty SFP report fields and components (Continued)
Field/Component
Description