Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 719)

Brocade Network Advisor SAN User Manual 667
53-1003154-01
Security configuration deployment
17
Configuring a daily deployment schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To configure security configuration schedule, refer to step 11 of “Scheduling a security
configuration deployment” on page 665.
Configuring a weekly deployment schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Week list.
To configure security configuration schedule, refer to step 11 of “Scheduling a security
configuration deployment” on page 665.
Configuring a monthly deployment schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
To configure security configuration schedule, refer to step 11 of “Scheduling a security
configuration deployment” on page 665.