Removing a host from active discovery, Rediscovering a host to active discovery, Rediscovering a previously discovered host – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 116
64
Brocade Network Advisor SAN User Manual
53-1003154-01
Host discovery
3
Removing a host from active discovery
If you decide you no longer want the Management application to discover and monitor a specific
host, you can delete it from active discovery. Deleting a host also deletes the host data on the
server (both system-collected and user-defined data) except for user-assigned names for the device
port, device node, and device enclosure information.
To delete a host from active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to delete from active discovery in the Discovered Hosts table.
3. Click Delete.
4. Click OK on the confirmation message.
The deleted host displays in the Previously Discovered Addresses table.
5. Click Close on the Discover Host Adapters dialog box.
Rediscovering a host to active discovery
To rediscover a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to rediscover in the Discovered Hosts table.
3. Click Rediscover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table. The discovery status is updated
dynamically.
5. Click Close on the Discover Host Adapters dialog box.
Rediscovering a previously discovered host
To return a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to return to active discovery in the Previously Discovered Addresses
table. The table displays the Network Address, Name, User ID, Discovery Type, Communication
Protocol, and Port details of the selected host.
3. Click Discover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table.
5. Click Close on the Discover Host Adapters dialog box.