Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 124)

72 Brocade Network Advisor SAN User Manual
53-1003154-01
VM Manager discovery
3
The following are samples of actual ESX host status messages:
• Active
• Discovery pending,
• Excluded,
• Conflict – Existing Host <hostname>
3. Refresh the Discover VM Managers list by clicking Refresh.
4. Click Close on the Discover VM Managers dialog box.
Troubleshooting VM manager discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
Verify IP connectivity by issuing a ping command to the switch.
1. Open the command prompt.
2. From the Server, type
ping Device_IP_Address .