Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 652)

600 Brocade Network Advisor SAN User Manual
53-1003154-01
Backup support
15
Enabling backup
Backup is enabled by default. However, if it has been disabled, complete the following steps to
enable the function.
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Select the Enable Backup check box.
4. Click Apply or OK.
Disabling backup
Backup is enabled by default. If you want to stop the backup process, you must disable backup. To
disable the backup function, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Clear the Enable Backup check box.
4. Click Apply or OK.