Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 457)

Brocade Network Advisor SAN User Manual 405
53-1003154-01
Assigning a device to the Call Home center
9
Assigning a device to the Call Home center
Discovered devices (switches, routers, and directors) are not assigned to a corresponding Call
Home center automatically. You must manually assign each device to a Call Home center before
you use Call Home.
To assign a device or multiple devices to a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the devices you want to assign to a Call Home center in the Products List.
3. Select the Call Home center to which you want to assign the devices in the Call Home Centers
list.
You can only assign a device to one Call Home center at a time.
4. Click the right arrow button.
The selected devices display beneath the selected Call Home center. Devices assigned to a
Call Home center do not display in the Products List.
5. Click OK to close the Call Home dialog box.
Removing a device from a Call Home center
To remove a device or multiple devices from a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the Call Home center from which you want to remove devices in the Call Home Centers
list.
3. Select the devices you want to remove from the selected Call Home center.
4. Click the left arrow button.
A confirmation message displays.
5. Click OK.
The selected devices are removed from the Call Home center and display in the Products List.
6. Click OK to close the Call Home dialog box.
Removing all devices and filters from a Call Home center
To remove all devices and filters from a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the Call Home center from which you want to remove devices and filters in the Call
Home Centers list.