Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1436)

1384 Brocade Network Advisor SAN User Manual
53-1003154-01
Server and client support save
34
Client support save using a command line interface
Use the following procedures to capture client support save files through the command line
interface (CLI).
Capturing client support save using the CLI (Windows)
To capture client support save files through the CLI, complete the following steps.
1. Go to the following location:
• (Local client) User_Home/Management_Application_Name/localhost
• (Remote client) User_Home/Management_Application_Name/Server IP
2. Run the clientsupportsave.bat file.
3. Define a capture location by typing
clientsupportsave
<path> in the CLI. If the path has
spaces, enclose it in double quotes.
By default, the capture location is one of the following:
• (Local client) User_Home/Management_Application_Name/localhost
• (Remote client) User_Home/Management_Application_Name/Server IP
4. Use an archive tool to create a ZIP file of the support save.
Capture client support save using the CLI (Linux)
To capture client support save files through the CLI, complete the following steps.
1. Go to /root /Management_Application_Name_Folder/Server IP.
2. Run the clientsupportsave.sh file.
3. Define a capture location by typing
sh clientsupportsave
<path> in the CLI. If the path has
spaces, enclose it in double quotes.
By default, the capture location is /root /Management_Application_Name_Folder/Server
IP/support.
4. Use an archive tool to create a ZIP file of the support save.