Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1375
Brocade Network Advisor SAN User Manual
1323
53-1003154-01
Event logs
32
The Define Filters dialog box displays.
FIGURE 573
Define Filter dialog box - Basic tab, IP tab selected
3. Use the following to include or exclude products.
•
To include an event type in the filter, select the event from the Available Products list and
click the right arrow.
•
To exclude an event type from the filter, select the event from the Selected Products to be
displayed list and click the left arrow.
•
To include all products, select the Allow All Products check box.
4. Select from the following to include or exclude event types.
•
To include an event type in the filter, select the event category from the Available Event
Category list and click the right arrow.
•
To exclude an event type from the filter, select the event from the Selected Event Category
and Severity to be displayed list and click the left arrow.
5. From the Selected Event Category and Severity to be displayed list, select one of the following
severity levels to assigned to the selected event action:
•
Emergency
•
Alert
•
Critical
•
Errors
•
Warning
•
Notice
•
Info