Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 517)

Brocade Network Advisor SAN User Manual 465
53-1003154-01
SMI Agent Configuration Tool
11
1. Click the Authentication tab.
FIGURE 190 Authentication tab
2. Select the Enable Client Mutual Authentication check box, as needed.
If the check box is checked, CIM client mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
3. Select the Enable Indication Mutual Authentication check box, as needed.
If the check box is checked, indication mutual authentication is enabled. If the check box is
clear (default), indication mutual authentication is disabled.
4. Click Apply.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
5. Click Close to close the SMIA Configuration Tool dialog box.